|
How do you hook up the 100 dollar Kodak Easy share cameras to the computer to load them? I don't have a docker. I have one wire that you're supposed to hook up the Camera to the computer with, but where on the back of the computer do you hook it up too? I didn't read the directions because I want to take the easy way out.
Thank you :) - Adrianna, 15
Oh and I don't know if this helps but, I do have a memory card.
[ ]
Want to answer more questions in the Technology category?
Maybe give some free advice about: Computers?
This camera wire (I'm holding mine right now) is a USB wire. If there is a little symbol that looks like a cactus, that's where it goes. The other end goes into the camera :). Leave the memory card in. READ THE INSTRUCTIONS!!!
]
Dear Adrianna,
I think I can help you. Find the spot where it looks like something like your chord would go. If you have a newer computer then it should be in the front and not the back. I hope I helped.
Clash2004
PS: I know what you're talking about I just cannot recall the name of where the chord goes. Good Luck
]
You probably plug it in where you plug a printer in. Look at the shape of the plug on the camera.
signed,
M.J.
]
USB.
Find the smaller end of the cable. Plug into camera. Look at other end of cable. Notice shape. Look on back of computer. There will be a port with the same symbol and shape. Plug it in.
GOTO Kodak site and download their drivers.
Turn on your camera.
GOTO windows explorer and your camera should show up as a removable drive. Copy/paste to your computer.
]
well it is easiest for me to put my picture card into the computer. but that will only work if ou have the spaces for the card under the cd spot.
hope this helps ...if you have more questions message my inbox
]
there should be a wire that came with the camera. Take the side of the wire that has three lines with points at the end and plug it into the back of your computer (where you should see a sign just like the one on the wire). Then take the other side of the wire, and plug it into your camera. On the left side there should be a little 'door' that can be opened that also has that sign on it. Flip it open and Plug the the other side of the wire into the smallest available hole. If you have not yet put in your memory card, do it before you plug in the camera to the computer. Push it down into the thin opening with the 'PNY' label facing down. Make sure your camera is turned off when you plug it in. Then, turn it anywhere on the dial besides 'off', or 'favorites' it should turn on the camera and make the sonnection to your computer. A box will appear to install the camera. Once installed, on your camera screen and computer screen it will say for example: Downloading 80 %. ONce it is up to 100 you can disconnect your camera. It will ask you to name the album and pick what photos sto be in it. Once selected, you can add affects to your photo and such..
if you have any problems just drop one in my box :]
]
ok you probably mean usb?? you can try a few things-
look in the back of your monitor. on the cable it should have some sort've design thing. it's like 3 lines. whatever design it is er color, it matches up with one in the back & you connect it there. if you have a memory card & your computers newer, then there's a slot that says MMC/SD & you put it in there. if not you'll have to use the cord. you can try putting the card into the printer & that says SM er plugging the camera into the printer. there's a picture of a printer on the slot thing. if you have any other questions juss leave em in my inbox.
-hope that helped!♥
]
More Questions:<<< Previous Question: hair
| Next Question >>>
|
|