|
Pro Engineer Wildfire 3.0 School Edition.
I have a project that I am completely stumped on, i have to make a cellphone that is made to be futuristic. We need research and to make it in Pro Engineering. I'd really appreciate your help, because I don't know how to get started, any ideas/ tutorials for a CELL phone with no antenna.
~Gina
[ ]
Want to answer more questions in the Work & School category?
Maybe give some free advice about: School?
Hi there,
Most people here will have never heard anything of Pro/ENGINEER, so I will point you in a few directions that might be helpful not only with this project but with your future in Pro/ENGINEER Wildfire 3.0, 4.0 and beyond. :-)
The Eng-Tips forums are marvelous no matter what kind of engineering you are doing/studying.
They even have a dedicated forum for Pro/ENGINEER users:
[Link](Mouse over link to see full location)
If you ask your question there, you will probably have more help than you need. Be sure that you tell them you are a student in desperate need of help, since most of the people there are building things in Pro/ENGINEER for a living these days.
MCAD Central also has a very busy helpful forum you should post to:
[Link](Mouse over link to see full location)
... this forum is also dedicated to people who use Pro/ENGINEER.
MCAD Central has a variety of free part file downloads, but no cell phone I could find.
One of the things I would do when posting would be to ask if anyone has a cell phone part file you can tinker with to help with your learning process. Reverse engineering the model with an antenna should give you what you need to remove the antenna and build your own model.
I know it is a hard subject, but it can be very rewarding. If you get really into this, there are books you should buy. If that happens someday, drop me a note and I will point you in the right direction.
Have fun!
]
More Questions: |